Kenwood TS-60S Instruction Manual page 28

3 COMMUNICATION
i
ND
Communication
terminal
@ Frequency Readout
Refer to "RECEPTION", Itern 5 on page 27.
Refer to your TNC Instruction Manual.
Be courteous; make sure your transmission
doesn't interfere with others. Although packet
protocol can handle multiple stations on a single
requency, overall throughput decreases due ta
packet collisions.
5 Adjust the output level from the TNC while
watching the RF meter to avoid output power
saturation. On packet or AMTOR, adjust for a
maximum meter reading of 10 with a steady mark
or space. On RTTY, adjust the level for a
maximum reading of 5 due to the higher duty cycle
of this mode.
28