Kenwood TS-60S Instruction Manual page 40

SCAN SPEED CHANGE
The scan speed can be varied fram the default fastest
rate using the RIT control.
A weight value appears on
the display right during scan that acts as a speed
reference number.
Turning the RIT control clockwise
decreases the scan speed, and counterclockwise
increases the speed.
5 SCAN
When using the 500 Hz filter or listening for
Particularly weak signals, use a slower scan speed to
ensure scan stops on all signals.
Busy-Frequency Busy-Frequency
Stop OFF Stop ON
1 kHz | 10 kHz 5 kHz
Remember to center the RIT control once finished
scanning to avoid confusion later when the RIT is
used.
40