Kenwood TS-60S Instruction Manual page 19

2 CONTROLS AND CONNECTORS
ML M.SCR PRG SCAN
LSB USB CW-N FMAM TONE
@ MENU
Appears when entering the MENU Set-up mode.
® AIP
Appears when the Advanced Intercept Point function
is selected with the AIP/ATT button.
@ ATT
Appears when the ATTenuator is selected with the
AIP/ATT button.
@ NB
Appears when the Noise Blanker is on.
@ AVFOB
Either A VEO or VEO B appears, depending on which
VFO is selected with the A/B button. "A" appears if
Menu A is selected. "B" appears if Menu B is
selected.
© SPLIT
Appears when the SPLIT frequency function is on,
@ FAST/SLOW
Either FAST or SLOW appears, depending on which
AGC speed is selected, (No indicator appears in the
FM mode.)
F.LOCK
Appears when the Fraquency LOCK function is on.
19
® ®
ML M.SCR PRG SCAN
LSB USB CW-N FMAM TONE
LI |
® 66 ®
@ 1MHz
Appears when the MHz function is on. Also appears
in the Memory Channel mode when selecting from
only programmed channels, or the Memory Scroll
mode when choosing empty memory channels,
@ M.CH
Appears after switching to the Memory CHannel mode
using the M/V button or Memory Scroll made using the
N.IN button.
@ Memory channel display
Displays the selected memory channel number.
@ Dot
Appears when memory channels are locked-out.
Refer to Memory Channel Lock-out, on page 38.
® Digital frequency display
Displays the operating frequency and menu selections.
® RIT
Appears when Receiver Incremental Tuning is on.
® Digital RIT display
Displays the amount of frequency shift with the RIT
on, the scan speed value during scan, or the one and
ten Hertz frequency digits when using the MC-47.