Huawei UPS5000-H-600 User Manual page 88

UPS5000-H-600 kVA-FTN
User Manual (Singapore, 100 kVA Power Modules)
Figure 4-8 Installing an expansion sleeve
(1) M12x60 bolt
(4) Expansion sleeve
Step 3 Remove the left panel from the UPS and install it on the side of the inductor
cabinet.
Step 4 Move the cabinet to the installation position.
Step 5 Combine the inductor cabinet, bottom cabling cabinet, and UPS cabinet together.
1.
2.
3.
Issue 02 (2023-11-07)
Remove the front panel from the bottom cabling cabinet.
Remove certain front covers and the rear door panel from the inductor
cabinet.
Figure 4-9 Removing certain covers
Combine the cabinets.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Spring washer
(5) Expansion nut
4 Installation and Cable Connection
(3) Flat washer
(6) Concrete floor
80