Table of Contents
Advertisement
Tools and measurement devices
General
The "Tools and measurement devices" chapter contains an overview and description of
all the tools needed to properly service the device. This includes the following tools:
-
-
-
-
All the required special tools, measuring and inspection equipment can be found in the
equipment lists at "downloadcenter.fronius.com".
Required tools
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Tool adapters
Small-handle manual torch version
-
d and i manual torch version
-
Measuring and
Equipment for inspection according to PP-SER-2010 test schedule
inspection equip-
-
ment
Equipment for inspection according to PP-SER-2001 test schedule
-
-
Equipment for inspection according to PP-SER-2002 test schedule
-
Required tools
Tool adapters
Measuring and inspection equipment
Auxiliary materials
TX 6 screwdriver
TX 8 screwdriver
Torque screwdriver 1–6 Nm (42,0411,0013)
Torque screwdriver 0.4–1.2 Nm (42,0435,0210)
Torque screwdriver for socket (42,0411,0168)
Socket 1/4" contact element (42,0001,6754)
Size 7 mm wrench
Size 8 mm wrench
Size 10 mm wrench
Size 11 mm wrench
Needle-nosed pliers
Side cutters
Vise-grip wrench
Oetiker pliers
Knife
Extractor tool
Threaded adapter hose retraction (42,1000,0364)
Threaded adapter hose retraction (44,0001,0017)
Insulation test:
-
Insulation meter (Metriso 5000)
Gas flow rate test:
-
Test box torch flow rate (4,078,016)
Water flow rate test:
-
Flow rate and leak test device (torch test bench)
-
Short circuit adapter TTB ML W (42,1600,0015)
-
Short circuit adapter lock TTB (44,0001,0016)
Voltage drop measurement
-
Digital multimeter
-
Current load test adapter (44,0001,0018)
7
Advertisement
Table of Contents
Troubleshooting
