Pressure Above Upper Limit - Agilent Technologies 1260 Infinity VL User Manual

7
Error Information
Module Error Messages

Pressure Above Upper Limit

Error ID: 2014, 2500
The system pressure has exceeded the upper pressure limit.
Probable cause
1
2
3
4
80
Upper pressure limit set too low.
Blockage in the flowpath (after the damper).
Defective damper.
Defective main board.
Suggested actions
Ensure the upper pressure limit is set to a value
suitable for the analysis.
Check for blockage in the flowpath. The
following components are particularly subject to
blockage: inline filter frit, needle (autosampler),
seat capillary (autosampler), sample loop
(autosampler), column frits and capillaries with
small internal diameters (e.g. 50 µm ID).
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
1260 Infinity QuatPump VL User Manual