Honda CR125R 1992 Service Manual page 186

Rear Wheel/Suspension
Assembl~,
(1) SWINGARM
(5) DUST SEAL CAP
(6) CHAIN GUIDE
Apply grease to the needle bearing and the inside of the dust
seals and collars.
Install the drive chain guide and chain slider.
Installation
Install the swingarm onto the frame, and tighten the pivot nut
to the specified torque.
Torque: 90 N•m (9.0 kg-m, 65 ft-lb)
12-28
( 1) PIVOT COLLAR
/c
(3) DUST SEAL CAP
'
'
,--, I
(1) SWINGARM
RICIERED