Advertisement
Rear Wheel/Suspension
Tighten the bolt and nut and
pull
the spherical bearing out of
the upper mount.
(3) NUT
I
(1)
METAL TUBING
(more than
26.5 mm I.D.)
(2)
BOLT
Apply multi-purpose grease NLGI No. 2 (Molybdenum disulfide
MoS2
additive) to the new spherical bearing.
Assemble the items onto the upper mount as shown.
Tighten the bolt and nut and install the
spherical
bearing onto
the upper mount.
NOTE
• Drive the bearing in evenly; do not allow
it
to tilt.
Disassemble the bolt, nut, washer and tubes.
Install the new stop ring into the groove of the upper mount
securely.
Assemble the items onto the upper mount as shown.
Tighten the bolt and nut to press the
spherical
bearing into the
upper mount until it seats against the stop ring end.
Apply grease to the lip of the new dust seals and install
t
hem.
Install the collars.
(more t han
26.5 mm I.D.)
(6)
STOP RING
(2)
BOLT
12-22
RICIERED
( ) WASHER
(1)
COLLARS
(2)
DUST SEALS
(3)
NUT
(1)
M
ETAL TUBING
(more than
26.5 mm I.D.)
Advertisement
