Honda CR125R 1992 Service Manual page 115

Install the thrust washer onto the countershaft.
Install the starter idle gear onto the countershaft.
Install the following:
- Clutch (page 9-6)
- Right crankcase cover (page
9-2)
Gearshift Linkage
Removal
Remove the following:
- Right crankcase cover (page
9-2)
- Clutch (page 9- 3)
Remove the gearshift pedal and pull the gearshift spindle out.
Remove the shifter collar.
Remove the guide plate bolts, the remove the guide plate and
drum shifter as an assembly.
NOTE
• Do not let the ratchet pawls fall when removing the
guide plate and drum shifter.
Remove the bolt, stopper arm and return spring.
Remove the shift drum center pin and shift drum center.
Clutch/Kickstarter/Gearshift Linkage
►
f
(1) GEARSHIFT PEDAL_,.
9-11
RICIERED