Camera Functions; Roi (Region Of Interest); Roi (One Region) - Omron STC-LBS34U3V-SWIR Product Specifications And User's Manual

9

Camera Functions

This chapter describes camera functions.
9.1

ROI (Region of Interest)

This sets the ROI in order to output selected area of image.
The frame rate increases when reducing height of image. The frame rate does not change when reducing width of
image.
GenICam Parameters
Width
Height
OffsetX
OffsetY
The parameters define as following chart.
(*) Width, Height, OffsetX, OffestY setting steps is same in Binning.
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
IInteger Type Horizontal (Pixel) size
Sets the width of image. "Width + OffsetX" should not exceed maximum width.
Range: 64 to 640, Default: 640
Setting steps: 16 pixels (64 pixels at Packed)
IInteger Type Vertical (Line) size
Sets the height of image. "Height + OffsetY" should not exceed maximum
height.
Range: 8 to 512, Default: 512
Setting steps: 8 lines
IInteger Type Horizontal (Pixel) offset
Default: 0
Setting steps: 8 pixels
IInteger Type Vertical (Line) offset
Default: 0
Setting steps: 8 lines
ROI Region
OffsetX
Width
OffsetY
Height
No. 22S036-00
32/54