The exposure synchronizes trigger signal.
The value on ExposureTime is actual exposure time.
When the polarity on LineInverter is positive (false), Exposure starts on rising edge of trigger.
When the polarity on LineInverter is negative (true), Exposure starts on falling edge of trigger.
To work the camera under this mode, as following setting have to be set.
・ExposureMode: Timed
・TriggerSelector: FrameStart
・TriggerMode: On
(*) On TriggerMode except FrameStart should be set Off.
Timing
トリガー入力(正極性)
トリガー入力(負極性)
露光
映像出力
Delay time on exposure start timing in sensor Jitter (unit:
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
Trigger Input
(Positive)
I/O Delay (tIPDLH)
Trigger Input
(Negative)
Exposure
Image Out
Image Output Format
8bits
10bits / 10bits Packed
12bits / 12bits Packed
I/O遅延(tIPDLH)
I/O Delay (tIPDHL)
I/O遅延(tIPDHL)
LineDebounceTime
TriggerDelay
STC-LBS34U3V-SWIR
0 to 6.95
0 to 7.47
0 to 13.09
Exposure Start Duration inside of sensor
センサー内部の露光開始遅延
ExposureTime
seconds
μ
)
No. 22S036-00
24/54