Table of Contents
Advertisement
The gain adjusts automatically to achieve target brightness.
When the current brightness of image was darker than target brightness, increases gain up to
"GainAutoLimitMax".
When the current brightness of image was brighter than target brightness, decrease gain down to
"GainAutoLimitMin".
GenICam Parameters
GainAuto
GainAutoLimitMax
GainAutoLimitMin
The exposure time adjusts automatically to achieve target brightness.
When the current brightness of image was darker than target brightness, extend exposure time up to
"ExposureAutoLimitMax".
When the current brightness of image was darker than target brightness, reduce exposure time down to
"ExposureAutoLimitMin".
GenICamParameters
ExposureAuto
ExposureAutoLimitMax
ExposureAutoLimitMin
Please follow setting procedure shown below.
Setting Procedure
1.
Sets "Timed" at "ExposureMode" (When using Auto Exposure)
2.
Sets "Continuous" at "ExposureAuto" (When using Auto Exposure)
3.
Sets "Exposure AutoLimitMax" (When using Auto Exposure)
4.
Sets "Exposure AutoLimitMin" (When using Auto Exposure)
5.
Sets "Continuous" at "GainAuto" (When using AGC)
6.
Sets "Gain AutoLimitMax" (When using AGC)
7.
Sets "Gain AutoLimitMin" (When using AGC)
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
IEnumeration Type
Switch ON / OFF for AGC
Continuous: AGC On, Off: AGC Off.
Default: Off
IFloat Type
Sets the maximum gain for AGC
Range: 0 to 255 Default: 127
This value sets as maximum gain for AGC.
IFloat Type
Sets the minimum gain for AGC
Range: 0 to 255, Default: 0
This value sets as minimum gain for AGC.
IEnumeration Type
IFloat Type
IFloat Type
Switch ON / OFF for Auto Exposure
Continuous: Auto Exposure On,
Off: Auto Exposure Off.
Default: Off
Sets the maximum exposure time in μsecond unit
Range: Same as Exposure Time Range for each PixelFormat
Sets the minimum exposure time in μsecond unit
Range: Same as Exposure Time Range for each PixelFormat
No. 22S036-00
38/54
Advertisement
Table of Contents
