Io Function; Input Port Function; Trigger Input; Linestatus - Omron STC-LBS34U3V-SWIR Product Specifications And User's Manual

8

IO Function

This chapter describes IO functions.
In this chapter, the IO Port places as "Line". The follow chart details relationship of Line and IO Port.
GenICam Parameters
LineSelector
LineMode
LineInverter

LineStatus

LineSource
UserOutputSelector
UserOutputValue
8.1

Input Port Function

This function sets input on LineMode, then assigns Line as input.
The following functions can be assigned as input.
When select "input" assign port at TriggerSource, input signal can be assigned as Trigger.
The input signal can be switched to Active-Low (LineInverter: true) or Active-High (LineInverter: false).
(*) When the Line polarity changing by LineInverter, active polarity of input trigger signal is changed.
This function monitors signal status on input Line.
The High level (LineStatus: true) or Low level (LineStatus false) status can be seen through software.
STC-LBS34U3V-SWIR
Product Specifications and User's Guide
IO Port
Pin No.
2
3
4
IEnumeration Type Select Line
IEnumeration Type Switch input / output direction for Line that was selected at LineSelector.
Input: set as input, Output: set as output
IBoolean Type Switch polarity inversion ON / OFF for Line that was selected at LineSelector.
False: polarity inversion Off (Active-High),
True: polarity inversion On (Active-Low)
IBoolean Type Line status (High / Low)
IEnumeration Type Set function for Line that was selected at LineSelector
IEnumeration Type Select UserOutput
IBoolean Type Switch voltage level of UserOutput that was selected at UserOutputSelector
False: Low voltage level, True: High voltage level
Signal Name Line number
GPIO2 Line2
GPIO1 Line1
GPIO0 Line0
No. 22S036-00
27/54