Connection Of The Air Duct; Connection Of The Unit To Electric Network; Start-Up Recommendations; System Protection - Salda RIRS H EKO 3.0 Mounting And Installation Instruction

5.6.

CONNECTION OF THE AIR DUCT

•
•
•
and noise level, you can increase the diameter.
• In order to reduce the level of the noise in the air supply system, install dampers (see the chapter on air supply system installation).
•
• External air and exhaust system piping should be isolated in order to prevent heat loss and condensation.
•
• When installing air ducts next to the ventilation equipment, brackets must be used. They suppress vibration and assure secure installation of the
• Air ducts are often mistakenly connected in inappropriate location. The ventilation units bear the labels indicating the correct air duct connection
5.7.

CONNECTION OF THE UNIT TO ELECTRIC NETWORK

•
•
•
• The unit must be earthed according to electrical equipment installation regulation.
•
•
•
•
made during transportation.
•
The manufacturer does not assume any liability for personal injuries and property damage due to non-conformance with the
provided instructions.
5.8.

START-UP RECOMMENDATIONS

5.8.1. SYSTEM PROTECTION

RIRS EKO 3.0
F1
F2
RIRS EKO 3.0
Mains Fuse
RIRS 400-700 H EKO 3.0 v2023.2
Figure 5.5.2.1. Floor mounting
"DIMENSIONS AND WEIGHT".
400 HE 400 HW
10 A 5 A
6,3 A 1 A
400 HE 400 HW
10 A 6 A
500 HE 500 HW
10 A 5 A
6,3 A 1 A
500 HE 500 HW
10 A 6 A
700 HE 700 HW
15 A 10 A
10 A 1 A
700 HE 700 HW
16 A 6A
EN | 11
-
-