5.5.5. DRAINAGE (SMARTY XV)
DRAINAGE SYSTEM INSTALLATION SMARTY 2X V
øD
Figure 5.5.5.1. Drainage system installation (øD=150 mm)
-
ATTENTION: Screwing force may not exceed 2 Nm.
DRAINAGE SYSTEM INSTALLATION SMARTY 3X V / 4X V
1. Connect the drain couplings
(ZPGGM056
2. Connect drain couplings part B(G ½ male) to condensate syphon or looped sanitary hose (IV-V).
5.6.
CONNECTION OF THE AIR DUCT
•
•
•
and noise level, you can increase the diameter.
• In order to reduce the level of the noise in the air supply system, install dampers (see the chapter on air supply system installation).
SMARTY v2023.1
EN |
19