Drainage; Connection Of The Air Duct; Connection Of The Unit To Electric Network - Salda RIS 700 H EKO 3.0 Mounting And Installation Instructions Manual

5.5.3. DRAINAGE

5.6.

CONNECTION OF THE AIR DUCT

•
•
•
and noise level, you can increase the diameter.
• In order to reduce the level of the noise in the air supply system, install dampers (see the chapter on air supply system installation).
•
• External air and exhaust system piping should be isolated in order to prevent heat loss and condensation.
•
• When installing air ducts next to the ventilation equipment, brackets must be used. They suppress vibration and assure secure installation of the
• Air ducts are often mistakenly connected in inappropriate location. The ventilation units bear the labels indicating the correct air duct connection
5.7.

CONNECTION OF THE UNIT TO ELECTRIC NETWORK

•
•
•
• The unit must be earthed according to electrical equipment installation regulation.
•
•
•
RIS 700 H EKO 3.0 v2020.1
Figure 5.5.2.1. Floor mounting
Figure 5.5.3.1. Drainage installation
-
EN | 11