Table of Contents
Advertisement
•
Support for canister system
•
Hose rewind
•
Battery compartment cover
1. Put the device carefully on the front.
2. Remove the device base in the following order A - B - C - D:
Mounting
NOTICE
Incorrectly mounted device base.
Device moves during the operation.
•
Attach the device base with particular care, according to the operating instructions.
Requirements:
The following parts are removed:
•
Canister system
•
Support for canister system
•
Hose rewind
•
Battery compartment cover
1. Put the device carefully on the front.
2. Take care that the indentations at the device base are fitted to the protruding edges
at the device.
3. Attach the device base in the following order D - C - B – A. The arrows show the
points at which the device and the device base have to engage with each other.
4. Firmly press on all sides again.
5. Afterwards the following parts can be mounted:
-
-
-
-
28
Setting up and starting up
A
D
B
C
D
Battery compartment cover (chapter „6.5 Battery exchange" on page 40)
Hose rewind (chapter „3.6 Hose rewind" on page 27)
Support for canister system (chapter „3.5 Support for canister system" on page
24)
Canister system (chapter „3.4 Connection and removal of canister system and
hoses" on page 18).
B
C
A
Advertisement
Table of Contents
