Table of Contents
Advertisement
10. If required: Press the inner canister lid forward and remove it from the outer
canister lid.
11. If required: Remove the float ball
canister lid
.
1
1
2
3
Connection
When you pour 50-100 ml water or disinfectant into the secretion canister, then it is
easier to clean.
1
2
3
1. Press the outer canister lid
2. Open the float ball compartment
3. Gently press the float ball compartment together.
4. Check whether the float ball moves easily and does not fall out of the float ball
compartment.
5. Place the secretion canister on a firm surface.
6. Press the canister lid onto the secretion canister. The canister lid cannot be placed
in a wrong position.
7. Press the canister lid tightly with both hands as far as it will go onto the secretion
canister.
8. Place the sealing ring
6
5
9. Insert a new bacterial filter
5
7
6
from the float ball compartment
3
1
2
3
4
4
on the inner canister lid
4
gently and insert the float ball
2
onto the filter holder
6
6
onto the filter holder
7
Inner canister lid
Float ball compartment
Float ball
Outer canister lid
, until it clicks into place.
1
3
.
5
.
5
of the inner
2
.
Setting up and starting up
19
Advertisement
Table of Contents
