Audio Board - HP Spectre x360 Maintenance And Service Manual

5. You must remove the bottom solid-state drive bracket to remove the system board. To remove the
bracket, lift it up to release it from the computer. The bracket is secured with adhesive.
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.

Audio board

To remove the audio board, use this procedure and illustration.
Table 5-7 Audio board description and part number
Description
Audio board
Audio board cable
Before removing the audio board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the audio board:
1. Remove the Phillips M2.0 × 3.5 screw (1) that secures the audio board to the computer.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 34).
32).
Spare part number
N66391-001
N66392-001
32).