9.
Release the cables from the clip (9).
10.
Open the display (1) to 270°.
11.
Remove the four Phillips M2.5 × 5.0 screws (2) that secure the display assembly to the computer.
12.
Separate the display (3) from the computer.
13.
To remove the display panel, camera module, and touch board, see
(without removing the display) on page
14.
To remove the hinges from the display rear cover:
a.
Remove the three Phillips M2.0 × 2.0 broadhead screws (1) from each hinge.
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
35.
Display subcomponents