Touchpad - HP Spectre x360 Maintenance And Service Manual

4. Lift the right side of system board (1), and then pull the system board right and away from the
left-side connectors to remove it from the computer (2).
To install the system board, reverse this procedure.

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-12 Touchpad description and part number
Description
Touchpad, nightfall black
Touchpad, slate blue
Touchpad power cable
Touchpad signal cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the large protective cover from the system board (see
page 47).
5. Remove the fans (see
6. Remove the heat sink (see
7. Remove the system board (see
Remove the touchpad:
1. Remove the tape (1) from both connectors on the touchpad.
60 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 34).
Fans on page 53).
Heat sink on page 54).
System board on page
32).
System board protective cover on
57).
Spare part number
N66405-001
N66406-001
N66407-001
N66408-001
32).