Audio Board - HP ProBook x360 11 G3 Education Edition Maintenance And Service Manual

Audio board

Table 5-10 Spare part description and number
Description
Audio board (includes rubber and cable)
Audio board cable (included in Cable Kit)
Before removing the audio board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
3. Remove the battery (see
Remove the audio board:
1. Disconnect the cable from the ZIF connector on the audio board (1).
2. Remove the two Phillips M2.5 × 4.0 screws (2) that secure the board to the bottom cover.
3. Release the audio board by lifting the right side until it rests at an angle, and then pull the board away
from the side and out of the computer (3).
Reverse this procedure to install the audio board.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page 33).
Spare part number
L43777-001
L43783-001
26).
26).