HP Spectre x360 Maintenance And Service Manual page 68

Table 5-13 Power button/fingerprint reader board description and part number (continued)
Description
Power button/fingerprint reader board, slate blue
Power button/fingerprint reader board cable
Before removing the power button/fingerprint reader board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the large protective cover from the system board (see
page 47).
5. Remove the fans (see
6. Remove the heat sink (see
7. Remove the system board (see
Remove the power button/fingerprint reader board:
1. Remove the protective tape (1) from the power button/fingerprint reader board cable.
2. Remove the cable (2).
62 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 34).
Fans on page 53).
Heat sink on page 54).
System board on page
32).
System board protective cover on
57).
Spare part number
N66411-001
N66412-001
32).