Control Panel For Refrigerator/Freezers - Summit FF64BSS User Manual

Control Panel for the FFRF24SS Model
ON/OFF Power
To turn the appliance off, press and hold the
goes off. To turn the appliance on, press and hold the
temperature display lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°F/1ºC.
DOWN
Used to decrease (cool) the set temperature by 1°F/1ºC.
Display
Display the digital temperature and service indicators.
is for the LEFT temperature zone and
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light
will be on when a multi-key function is selected. To perform a multi-key function, press and
hold the first key, then press the second key for at least 5 seconds and then release both
keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Setting the Temperature Control
•
This model has two separate temperature compartments. You can set the temperature of
the right compartment (refrigerator) by touching the right UP and DOWN symbols and set
the temperature of the left compartment (freezer) by touching the left UP and DOWN
symbols. When you touch either key for the first time, the LED readout will show the
original temperature set previously. (The temperature preset at the factory is 38°F/3°C for
the refrigerator compartment and 0°F/-18°C for the freezer compartment.)
•
The temperature you are setting will increase by one degree each time you touch the UP
symbol and will decrease by one degree each time you touch the DOWN symbol.
•
The range of the temperature control is from 36°F/2°C to 43°F/6°C for refrigerator
compartment and from -11°F/-24°C to 11°F/-12°C for freezer compartment.
•
To view the set temperature at any time, touch the UP or DOWN symbol. The set
temperature will temporarily flash in the display window for 5 seconds. Then the display
shows the current inner temperature again.
key for 5 seconds until the temperature display
key for 1 second until the
is for the RIGHT temperature zone.
20