Operating Your Appliance; Control Panel - Summit FF1DSS24 User Manual

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between
44º and 100ºF (7º to 38ºC). If the ambient temperature is above or below the recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions may cause interior temperatures to fluctuate. The expected
operating temperature range may not be reached.

Control Panel

ON/OFF Power
To turn the appliance off, touch and hold the key for 5 seconds until the temperature display goes
off. To turn the appliance on, touch and hold the key for 1 second until the temperature display
lights up.
NOTE: Touching the POWER key once can switch off the audible alarm when the alarm is on.
Up +
Used to increase (warm) the set temperature by 1°C/1ºF.
-
Down
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display in Fahrenheit or Celsius degrees.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will
be on when a multi-key function is selected. To perform a multi-key function, touch and hold the first
key, then touch the second key for at least 5 seconds and then release both keys.
Child Lock
The child lock will be activated automatically if in 2 minutes or longer, no key is touched. To cancel
the lock, touch the UP and DOWN keys at the same time for at least 5 seconds and the indicator
light will flash three times to confirm the action.
10