Table of Contents
Advertisement
REVERSING THE DOOR SWING OF YOUR REFRIGERATOR
This appliance has the capability of the door opening from either the left or right side. The unit is delivered
to you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow the instruction as described below:
1.
Remove the upper hinge cover (1) first.
2.
Remove the three screws (2) that hold the upper
hinge (3) (right side) to the frame. Take away the
upper hinge (3).
3.
Lift the door and place it on a padded surface to
prevent scratching it.
4.
Remove the three screws (6) that hold the lower
hinge (5) and remove hinge (5).
5.
Remove the cover (4) and move to the right side.
6.
Install the lower hinge (5) onto the left side of the
lower frame with three screws (6).
7.
Set the door into place, making sure the door
seats on the lower hinge (5).
8.
While holding the door in the closed position,
secure the upper hinge (3) in the top frame of left
side with three screws (2). Please remember not
to tighten the screws until the top of the door is
leveled with the counter top.
9.
Install the cover (1) on the upper hinge.
It is recommended that you install the appliance in a place where the ambient temperature is between 72º
and 78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be
reached.
CONTROL PANEL
ON/OFF POWER
To turn the appliance ON or OFF, press the
LIGHT
To turn the inner light ON and OFF.
OPERATING YOUR APPLIANCE
button/mark and hold for 3 seconds.
7
Advertisement
Table of Contents
