Settings Mode - Summit FF64BSS User Manual

Settings Mode

Certain settings on the refrigerators can only be selected in settings mode.
Touch and hold the UP key for 5 seconds to enter and leave Settings mode. The appliance will leave
Settings mode automatically after approximately one minute.
ºF/ºC Selection
1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode.
2. Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or Celsius
degree.
3. Touch and hold the UP key for 5 seconds to confirm the selection.
Display Brightness
1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
POWER key once.
2. Use the UP and DOWN keys to select the brightness of the display when the door is close. When
the door is open, the display brightness returns to its normal level.
• d0: off
• d1: dimmest setting (default)
• d2: medium setting
• d3: brightest setting
3. Touch and hold the UP key for 5 seconds to confirm the selection.
Interior Lighting Brightness
1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
POWER key twice.
2. Use the UP and DOWN keys to select the brightness of the interior lighting when the door is close.
When the door is open, the interior lighting returns to its normal level.
• L0: off when the door is close or open
• L1: dimmest setting
• L2: medium setting
• L3: brightest setting (default)
3. Touch and hold the UP key for 5 seconds to confirm the selection.
Fan Mode
1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
POWER key three (3) times.
2. Use the UP and DOWN keys to select the fan mode.
• F0: Silent mode - Energy saving mode (default)
• F1: DynaClima mode - half time
• F2: DynaClima mode - full time
3. Touch and hold the UP key for 5 seconds to confirm the selection.
Audible Tones
1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the
POWER key four (4) times.
2. Use the UP and DOWN keys to select the audible tones.
• S0: sensor tone ON, alarm tone OFF
• S1: sensor tone ON, alarm tone ON (default)
• S2: sensor tone OFF, alarm tone OFF
• S3: sensor tone OFF, alarm tone ON
3. Touch and hold the UP key for 5 seconds to confirm the selection.
17