Control Panel Only For Scr610Blsd - Summit FF64BSS User Manual

Hide thumbs Also See for FF64BSS:
Table of Contents

Advertisement

Control Panel only for Model SCR610BLSD
ON/OFF Power
To turn the appliance off, press and hold the
goes off. To turn the appliance on, press and hold the
display lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°F/1ºC.
To switch on the Silent mode, press and hold the UP key for 5 seconds. Three beeps will
confirm the selection.
DOWN
Used to decrease (cool) the set temperature by 1°F/1ºC.
To switch on the Dynamic Cooling mode, press and hold the DOWN key for about 5 seconds.
Five beeps will confirm the selection.
Light
The interior light makes it easy to view your items. Pressing the LIGHT symbol toggles
between 2 modes of operation for the internal lights: functional (default) mode and showcase
mode. If you are in functional (default) mode, the lights will turn on only when the door is open.
If you are in showcase mode, the lights will be on whether or not the door is open.
ºF/ºC Selector
Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5
seconds.
Setting the Temperature Control
You can set the temperature by pressing the UP and DOWN symbols. When you press
either of the two buttons for the first time, the LED readout will show the original
temperature set previously. (The temperature preset at the factory is 38°F, or 3°C).
The temperature you are setting will increase by one degree each time you press the UP
symbol and will decrease by one degree each time you press the DOWN symbol.
The range of the temperature control is from 36°F to 43°F.
To view the set temperature at any time, press the UP or DOWN symbol. The set
temperature will flash in the display window for 5 seconds. After 5 seconds, the
temperature inside the unit will reappear in the display window.
key for 5 seconds until the temperature display
key for 1 second until the temperature
18

Advertisement

Table of Contents
loading

Table of Contents