Table of Contents
Advertisement
OPERATING YOUR APPLIANCE
The appliance should be placed where the ambient temperature is between 10~38°C (50~100°F). If
the ambient temperature is above or below this range, the performance of the appliance may be
affected. Placing your appliance in extreme cold or hot conditions may cause interior temperatures
to fluctuate. Connect power cord to a properly grounded outlet.
This appliance is equipped with Memory IC – should there be a power interruption, the appliance will
auto recover at last setting.
Control Panel
ON/OFF Power / Mute
•
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds. When the
appliance is running, the
•
When the door is open more than 5 minutes, an alarm will sound. The compressor and outer fan
will stop working. Press
Setting the Temperature
•
Adjustable temperature: 34°F to 65°F (1°C to 18°C)
•
Set the desired temperature by pressing the corresponding buttons,
decrease. Each press is a 1-degree increment. Once released, the set temperature will flash for
approximately 5 seconds then revert to display the internal temperature.
•
To view your set temperature, press either the
flash the set temperature for 5 seconds.
•
The appliance has the capability to display temperature in either Celsius or Fahrenheit. To
change the temperature scale, press and hold both
seconds.
NOTE: The temperature inside may vary slightly depending on where the stored items are located
(upper/middle or lower section).
Smart Control Mode
•
When the door is opened, the inner light automatically turns on, and the inner fan stops.
•
When the door is closed, the inner light automatically turns off.
•
Door Open Alarm: When the door is opened for longer than 5 minutes, an alarm will sound,
and the compressor and outer fan will stop working.
symbol will be illuminated.
one time to stop the alarm from sounding until the door closed.
10
or
button once, and the LED display will
buttons simultaneously for approx. 3
to increase or
to
Advertisement
Table of Contents
