Summit FF64BSS User Manual page 26

Hide thumbs Also See for FF64BSS:
Table of Contents

Advertisement

"E3", "E4",
"E1" or "E2" indicates that the air
"E5" or "E7".
temperature sensor has failed.
"E3" or "E4" indicates that the defrost
sensor in the evaporator has failed.
"E5" indicates a defrost heater failure.
"E7" indicates a door switch failure.
Has an appliance door been open for
longer than 60 seconds? If not, then
the temperature has risen higher or
fallen lower than the temperature that
The alarm
has been set. This could be due to:
sounds and
The appliance door being opened too
the
often.
temperature
The ventilation opening being covered
display
or too dusty.
flashes.
A lengthy interruption in the power
supply.
A large amount of food has been added
to the unit.
The icon "--"
The display temperature is out of range.
is lit and
flashing in the
temperature
display.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET or visit
https://www.summitappliance.com/support.. We will do our best to answer your questions.
CALIFORNIA CARB/SNAP DISCLOSURE
This product uses eco-friendly hydrocarbon refrigerant and fully complies with California
CARB regulations.
However, we are required by California Law to provide the following disclosure statement in
every product sold in California.
"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited
Substances' for that specific end-use, in accordance with California Code of Regulations, title 17,
section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc.
and Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and
accurate."
This product does not use any refrigerants on the 'List of Prohibited Substances'"
If yes, close the door.
Do not open the door more often than
necessary.
Clear the obstructions and wipe off
the dust.
Leave the appliance to work for a
while until the set temperature has
been reached.
Only temperatures within the range
-49~99°F/-45~37°C can be
displayed. If the temperature is not
within this range, the icon "--" will be
displayed instead. This is normal.
26

Advertisement

Table of Contents
loading

Table of Contents