Operating Your Appliance; Control Panel For Refrigerator/Freezers - Summit SPRF34D User Manual

Frost-free refrigerator/freezers
Hide thumbs Also See for SPRF34D:
Table of Contents

Advertisement

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between
44º and 95ºF (7º to 35ºC). If the ambient temperature is above or below the recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions may cause interior temperatures to fluctuate. The expected
operating temperature range may not be reached.

Control Panel for Refrigerator/Freezers

ON/OFF Power
To turn the appliance off, touch and hold the
goes off.
To turn the appliance on, touch and hold the
lights up.
NOTE: Touching the POWER key once can switch off the audible alarm when the alarm is on.
Setting the Temperature Control
• The unit has two separate temperature compartments. You can set the temperature of the bottom
compartment (freezer) by touching the left UP and DOWN symbols and set the temperature of the
top compartment (refrigerator) by touching the right UP and DOWN symbols. When you touch
either key for the first time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 0°F/-18°C for freezer compartment and 39°F/4°C for
refrigerator compartment.)
• The temperature you are setting will increase by one degree each time you touch the UP symbol,
and will decrease by one degree each time you touch the DOWN symbol.
• The range of the temperature control is from -11°F/-24°C to 11°F/-12°C for freezer compartment
and from 36°F/2°C to 43°F/6°C for refrigerator compartment.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.
+
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
-
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
key for 5 seconds until the temperature display
key for 1 second until the temperature display
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clrf2dRdf24ssSprf6dSprf6d7

Table of Contents