LifeSpan SM-900 User Manual page 15

Commercial spin bike

Table of Contents

Fig 13

E. 4 User Setting Programs: P17~P20 (Fig17~Fig20)

Fig 17

2. Record the user's data of AGE even cut off the power.

3. Display Speed , RPM , TIME, DIST., CAL., WATT, PULSE, LEVEL at the same time.

4. The computer will turn off automatically if there is no operation, speed signal and pulse signal over

4 minutes. Meanwhile, it will store your current exercise data and turn the loading resistance to the

minimum. Once you press any button or in motion, the computer will turn on automatically.

BUTTONS

1. MODE

• In "STOP" mode(display STOP), press MODE button to enter into program selection and setting value

which flash in related window.

• In "START" mode(display START), press MODE button to quit SCAN mode and select main display

function.

Sign shows up, all functions show on the main display in their turns in every 6 seconds.

B: The main window displays the function corresponding to the small window flashing function sing.

• During any mode, hold down this button for 2 seconds to totally reset the computer.

Fig 14

Fig 15

Fig 18

Fig 19

Fig 16

Fig 20

OPERATION GUIDE |

Table of Contents