Ricoh 132 MF User Manual page 233

Printer Registration
Adjust the registration of each tray if necessary. You can adjust the registration value between -15
and +15 (that is, -1.5 and +1.5 mm, in 0.1 mm increments).
Default: 0 for all parameters
Item
Horiz.: Tray 1 Select this to adjust the tray 1 registration horizontally.
Horiz.: Tray 2 Select this to adjust the tray 2 registration horizontally.
Vert.: Tray 1 Select this to adjust the tray 1 registration vertically.
Vert.: Tray 2 Select this to adjust the tray 2 registration vertically.
Horiz.: Bypass Select this to adjust the bypass tray registration horizontally.
Tray
Vert.: Bypass Select this to adjust the bypass tray registration vertically.
Tray
Horiz.: Duplex Select this to adjust the registration of the back of duplex printing horizontally.
Unit
Vert.: Duplex Select this to adjust the registration of the back of duplex printing vertically.
Unit
Image Density
Item
Image Density Adjusts the density of images on prints.
Description
Description Value
-3 to +3
Default: 0
System Settings
231