Ricoh 132 MF User Manual page 321

5. Wipe the rubber part of the roller with a soft damp cloth. After that, wipe it with a dry
cloth to remove the moisture.
6. Reload the removed paper into the tray, and then push the tray carefully into the machine
until it clicks into place.
7. Insert the plug of the power cord into the wall socket securely. Connect all the interface
cables that were removed.
8. Turn on the power.
• If jams or multi-sheet feeds occur after cleaning the friction pad, contact your sales or service
representative.
• If Tray 2 is installed, clean its friction pad and paper feed roller in the same way as you did for
Tray 1.
Cleaning the Friction Pad and Paper Feed Roller
DYG278
DYH073
319