8. Configuring the Machine Using Utilities
Item
Select Paper Tray
Fax Number Confirmation
Item
Fax Number
Confirmation
Fax Received File Processing
Item
Received File
Processing
Auto Reduce RX Image
268
Select the tray for printing faxes from the following: [Auto], [Tray 1], or
[Tray 2].
If [Auto] is selected, the machine uses Tray 1 and Tray 2 if they contain
paper of the same size. In this case, the machine starts to print from the tray
specified as the priority tray for [Fax] in the [Priority Tray] page. If that tray
runs out of paper, the machine automatically switches to the other tray to
continue printing.
Only A4, Letter, or Legal size paper can be used for printing faxes. Make
sure to select a tray that contains paper of the valid size.
If Tray 2 is not installed, only [Tray 1] appears.
Enable this setting to configure the machine to require a fax number to be
entered twice when specifying a destination manually.
This setting appears only when the administrator password is set in the
[Administrator] page.
Select whether to print received faxes that are stored in the machine's
memory or to forward them to a destination specified in [Forwarding
Destination].
To forward received faxes without printing them, set [Print Received File] to
[Off] in [Reception Settings] under [Fax Features].
Enable this setting to reduce the main scan line to fit to the printable area,
and then print the image in it after reducing the size of the image.
Description
Description
Description