Ricoh 132 MF User Manual page 222

7. Configuring the Machine Using the Control Panel
Item
Manual POP
RX Image Auto
Reduction
Duplex Print
Select Paper Tray
Item
Select Paper
Tray
220
Description
Connects to the POP3 server to receive
e-mail messages manually.
Press [Yes] to connect to the POP3
server and receive e-mail messages.
Press [No] to exit to the previous level
of the menu tree without connecting to
the POP3 server.
Reduces the main scan line to fit to the
printable area, and then prints the
image in it after reducing the size of
the image.
Select [On] to enable this function.
Select [Off] to disable this function.
Specify whether or not received fax
documents are to be printed on both
sides of the paper.
Description
Specifies the tray for printing received
faxes.
Note that only A4, Letter, or Legal size
paper can be used for printing faxes.
Make sure to select a tray that contains
paper of the valid size.
If Tray 2 is not installed, only [Tray 1]
appears.
Value
-
• Off
• On
Default: [Off]
• Off
• Duplex Portrait: T to T
• Duplex Portrait: T to B
Default: [Off]
Value
• Auto
The machine uses Tray 1 and
Tray 2 if they contain paper of
the same size. In this case, the
machine starts to print from the
tray specified as the priority
tray in [Paper Tray Priority]
under [Paper Settings]. If that
tray runs out of paper, the
machine automatically
switches to the other tray to
continue printing.
• Tray 1
• Tray 2
Default: [Auto]