Table of Contents
Advertisement
Using a PIN Code
A router (access point) is needed to set up a connection. To establish a connection using the PIN code,
use a computer that is connected to the router (access point).
Make sure the Ethernet cable is not connected to the machine.
1.
Check that the router (access point) is working correctly.
2.
Open the PIN code configuration window (web page) for the router (access point) on
your computer.
3.
Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi)
connection is enabled.
4.
Press the [Home] key.
5.
Press the Wireless (Wi-Fi) icon on the [Home] screen.
6.
Enter the password using the number keys, and then press [OK].
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
7.
Press [Wireless (Wi-Fi) Sett.].
8.
Press [WPS].
9.
Press [PIN].
10.
Check the PIN code.
Write down the PIN code in case you might forget it.
11.
Enter the machine's PIN code (8 digits) on the router (access point)'s web page. (The web
page accessed in Step 2)
12.
Execute WPS (PIN system) from the router (access point)'s web page.
13.
Press [Connect] on the control panel.
"Please wait for 2 minutes" and connecting with PIN method starts.
14.
Check the result.
• Connection has succeeded:
Connecting the Machine to a Wireless Network
383
Advertisement
Table of Contents
Troubleshooting
