Using The Touch Panel - Sony BURANO MPC-2610 Operating Instructions Manual

Digital motion picture camera
Table of Contents

Advertisement

9
1. Overview

Using the Touch Panel

Touch Panel Usage Precautions
The LCD monitor of the unit is a touch panel,
which you operate directly by touch using
your finger.
• The touch panel is designed to be touched
lightly with your finger. Do not press the
panel with force or touch it using sharp-
edged or pointed objects (nail, ballpoint
pen, pin, etc.).
• The touch panel may not respond when
touched in the following circumstances. Also
note that these may cause a malfunction.
• Operation using the tips of finger nails
• Operation while other objects are
touching the surface
• Operation with a protective sheet or
sticker attached
• Operation with water droplets or
condensation on the display
• Operation using wet or sweaty fingers
Touch Panel Gestures
Tap
Lightly touch an item, such as an icon or menu
item, using your finger and then immediately
remove your finger.
Drag
Touch the screen and slide your finger to
the desired position of the screen, and then
remove your finger.
Flick/swipe
Touch the screen and quickly flick/swipe your
finger up, down, left, or right.
[Tip]
If the display content continues beyond the edges of the
screen, you can drag or flick the display content to scroll.
Configuring the Touch Panel
Touch panel operation can be enabled/
disabled using Touch Operation (page 58)
in the Technical menu.

Advertisement

Table of Contents
loading

Table of Contents