Table of Contents
Advertisement
61
3. Camera Operations
Network Menu
This section describes the function and settings of each menu item.
Factory default settings are shown in bold (for example, 18dB).
Network >Network Setup
Makes settings related to the network.
Menu item
Sub-item setting
Setup for
Mobile App
User Name
Input
Password
Generate
Execute / Cancel
Password
Show
Authentication
LAN Type
WLAN (AP Mode) / WLAN (ST Mode) /
Select
Wired LAN /
Off
Network >Wireless LAN
Sets settings related to wireless LAN connections.
Menu item
Sub-item setting
WPS
Execute / Cancel
MAC Address
Network >AP Mode Settings
Sets settings related to access point mode connections.
Menu item
Sub-item setting
Channel
Auto(5GHz) /
Auto
/ CH1 / CH2 / CH3 /
CH4 / CH5 / CH6 / CH7 / CH8 / CH9 /
CH10 / CH11
Camera SSID
& Password
Description
Starts the network setup assist tool.
Sets the user name for access
authentication.
Sets the password for access
authentication.
[Note]
From a security standpoint, it is recommended
that you set a password with a sufficiently long
character string that is hard to guess by others,
and that you store it safely.
Automatically generates a password for
access authentication.
Execute: Execute function.
Displays the user name password for
access authentication as text and QR
code.
Sets the LAN connection method.
Description
Establishes a connection using WPS
(Wi-Fi Protected Setup).
Execute: Execute function.
Displays the MAC address of the wireless
LAN interface of the unit.
Description
Sets the wireless LAN channel.
Auto(5GHz) is available on the WW279317
model only.
Displays the SSID and password of the
unit.
Network >AP Mode Settings
Sets settings related to access point mode connections.
Menu item
Sub-item setting
Regenerate
Execute / Cancel
Password
IP Address
Subnet Mask
Network >ST Mode Settings
Sets settings related to station mode connections.
Menu item
Sub-item setting
Camera
Enable /
Disable
Remote
Control
Connected
Network
SSID
Security
Password
DHCP
IP Address
Subnet Mask
Gateway
DNS Auto
Primary DNS Server
Secondary DNS Server
Description
Creates a new password.
Execute: Execute function.
Displays the IP address of the unit in
access point mode.
Displays the subnet mask of the unit in
access point mode.
Description
Sets whether to enable remote control
from a control device connected to the
unit by wireless LAN in station mode.
Displays the connected wireless LAN
network (access point).
Displays the SSID for the access point to
connect.
Displays the type of security for the
access point to connect.
Displays the password for the access
point to connect.
When Security is set to WEP or WPA:
*******
When Security is set to None: (blank)
Displays whether DHCP is on/off.
Displays the IP address of the unit when
DHCP is set to Off.
Displays the subnet mask of the unit
when DHCP is set to Off.
Displays the default gateway of the unit
when DHCP is set to Off.
Displays whether DNS acquisition is on/
off.
Displays the primary DNS server of the
unit when DNS Auto is set to Off.
Displays the secondary DNS server of the
unit when DNS Auto is set to Off.
Advertisement
Table of Contents
