Table of Contents
Advertisement
107
6. Connecting External Devices
Managing/Editing Clips using a Computer
Connecting using a USB Cable
Using a card reader (option)
Connect a CFexpress Type B card reader or
SD card reader to a computer using a USB
cable, and insert a memory card into the card
reader slot. The memory card is recognized
as a computer extension drive. On supported
computers, you can import clips at high speed
using the mass storage mode of the unit.
Using mass storage mode
[Note]
Mass storage mode cannot be used when USB Tethering
>Setting in the Network menu of the full menu is set to
On. Set to Off.
Connect the unit using a USB cable, and
insert a memory card in card slot A or B. The
memory card is recognized as a computer
extension drive.
1
Connect the USB-C connector (page 5)
and computer using a USB cable.
2
Turn the unit on.
A message appears on the LCD monitor
asking whether to enable USB
connections.
[Notes]
• Do not perform the following operations if the
access indicator is lit red.
– Turning the power off or disconnecting the
power cord.
– Removing the memory card
– Disconnecting the USB cable
• The USB connection confirmation message is not
displayed while another confirmation message
or progress message is displayed, for example,
when formatting or restoring a memory card.
The confirmation message is displayed when
the formatting or restoring execution ends. The
USB confirmation message is also not displayed
when the clip properties screen is displayed. The
message is displayed when processing ends or
when you return to the clips screen.
3
Turn the multi-function dial to select
Execute.
4
On Windows, check that the card is added
as a removable disk in the "My Computer"
window.
On Mac, check that a folder called "NO
NAME" or "Untitled" (editable) is created
on the Desktop.
[Notes]
• Do not perform the following operations if the access
indicator is lit red.
– Turning the power off or disconnecting the power
cord
– Removing the memory card
– Disconnecting the USB cable
• Operation is not guaranteed to work on all computers.
Using a Nonlinear Editing System
In a nonlinear editing system, editing software
(option) that supports the formats recorded by
the unit is required.
Use dedicated application software to save
the clips you want to edit on the HDD of the
computer beforehand.
Advertisement
Table of Contents
