Table of Contents
Advertisement
55
3. Camera Operations
Audio Menu
This section describes the function and settings of each menu item.
Factory default settings are shown in bold (for example, 18dB).
Refer to "Block Diagrams" (page 129).
Audio >Audio Input
Sets audio input settings.
Menu item
Sub-item setting
CH1 Input
INPUT1
/ Internal MIC / Shoe CH1
Select
CH2 Input
INPUT1 /
INPUT2
/ Internal MIC / Shoe CH2 Switches the input source for recording
Select
CH3 Input
Off /
INPUT1
/ Internal MIC / Shoe CH1
Select
CH4 Input
Off / INPUT1 /
INPUT2
Select
Shoe CH2
INPUT1 MIC
–80dB / –70dB / –60dB / –50dB / –40dB /
Reference
–30dB
INPUT2 MIC
–80dB / –70dB / –60dB / –50dB / –40dB /
Reference
–30dB
Line Input
+4dB / 0dB / –3dB / EBUL
Reference
Reference
–20dB / –18dB / –16dB / –12dB / EBUL
Level
CH1 Wind
On /
Off
Filter
CH2 Wind
On /
Off
Filter
CH3 Wind
On /
Off
Filter
CH4 Wind
On /
Off
Filter
CH3 Level
Auto
/ Manual
Control
Description
Switches the input source for recording
on channel 1.
on channel 2.
Switches the input source for recording
on channel 3.
/ Internal MIC /
Switches the input source for recording
on channel 4.
Sets the reference recording level for XLR
microphone input from INPUT1.
Sets the reference recording level for XLR
microphone input from INPUT2.
Selects the reference input level when
the INPUT1/INPUT2 switch is set to LINE.
Selects the recording level of the 1 kHz
reference tone signal.
Enables/disables the wind reduction
filter for channel 1 recording.
Enables/disables the wind reduction
filter for channel 2 recording.
Enables/disables the wind reduction
filter for channel 3 recording.
Enables/disables the wind reduction
filter for channel 4 recording.
Selects automatic audio input level
adjustment or manual adjustment for
recording channel 3.
[Note]
If both CH3 Input Select and CH4 Input Select
are set to Internal MIC, CH4 is switched to
automatic/manual in conjunction with this
setting.
Audio >Audio Input
Sets audio input settings.
Menu item
Sub-item setting
CH4 Level
Auto
/ Manual
Control
CH3 Input
0 to 99 (49)
Level
CH4 Input
0 to 99 (49)
Level
Audio Input
0 to
99
Level
Limiter Mode Off / –6dB / –9dB / –12dB / –15dB / –17dB
CH1&2 AGC
Mono
/ Stereo
Mode
CH3&4 AGC
Mono
/ Stereo
Mode
AGC Spec
–6dB / –9dB / –12dB / –15dB / –17dB
1kHz Tone on
On /
Off
Color Bars
Description
Selects automatic audio input level
adjustment or manual adjustment for
recording channel 4.
[Note]
If both CH3 Input Select and CH4 Input Select
are set to Internal MIC, CH4 is switched to
automatic/manual in conjunction with the CH3
Level Control setting.
Sets the input level for recording channel
3.
Sets the input level for recording channel
4.
Sets the audio input level.
Can be used as the master volume,
according to the settings of CH1 Level to
CH4 Level.
Selects the limiter characteristic for large
input signals when adjusting the audio
input level manually.
Sets the auto level adjustment mode for
recording channel 1 and channel 2. When
set to Stereo, the AGC is linked between
channels.
Sets the auto level adjustment mode for
recording channel 3 and channel 4. When
set to Stereo, the AGC is linked between
channels.
Selects the AGC characteristic.
Turns the 1 kHz reference tone signal on/
off when displaying color bars.
[Note]
When set to On, the 1 kHz reference tone signal
is set for recording on channel 3 and channel 4,
even if CH3 Input Select and CH4 Input Select
are set to Off.
Advertisement
Table of Contents
