Table of Contents
Advertisement
69
3. Camera Operations: Clip Operations
Playback Control Screen
When the LCD monitor is in information display mode, you can select a clip on the clips screen to
display the playback control screen. The function display area supports touch operation.
Function display area
ITEM button 1
1
4
ITEM button 4
[Note]
The areas labeled 1 to 6 correspond to ITEM buttons 1
to 6. Press an ITEM button to select the corresponding
item.
1.
F Rev button
Play back at high speed in the reverse
direction.
Press the button repeatedly to switch between
three speeds.
2.
Play/Pause button
Play a clip or pause playback.
3.
F Fwd button
Play back at high speed in the forward
direction.
Press the button repeatedly to switch between
three speeds.
ITEM button 2
ITEM button 3
2
3
5
6
ITEM button 5
ITEM button 6
4.
Prev button
Skip to the start of the previous clip.
5.
Stop/Clips button
Stop playback and return to the clips screen.
6.
Next button
Skip to the start of the next clip.
Status display area
1
13
12
11
10
1.
Time data display
Displays the timecode of the playback
position.
2.
Frame rate indicator
Displays the frame rate of the playback clip.
3.
Power supply voltage/Remaining battery
capacity indicator
Displays the power supply voltage or
remaining battery capacity.
4.
Audio level meters
Displays the playback audio level.
5.
Special recording mode indicator
Displays the special recording mode
information of the playback clip.
6.
Image resolution indicator
Displays the image resolution.
7.
Codec name display
Displays the name of the codec.
8.
Picture size indicator
Displays the picture size.
9.
Clip number/Total number of clips
indicator
Displays the Current playback clip number/
Total number of playable clips.
10.
Clip name display
Displays the name of the clip.
2
3
4
9
8
7
6 5
11.
Media indicator
Displays the media being played.
A
(protect) icon appears on the right if the
memory card is write-protected.
12.
Warning/error icon
Displayed when a warning or error occurs.
You can check the content of warnings and
errors by displaying the menu. If the screen
display is superimposed on an external
monitor, you can also check it on the external
monitor.
13.
Playback status indicator
Displays the playback operating status.
Advertisement
Table of Contents
