Sony BURANO MPC-2610 Operating Instructions Manual page 83

83
5. Shooting: Basic Operation Procedure
Reviewing the Recording (Rec
Review)
You can review the last recorded clip on the
screen (recording review).
[Note]
Rec Review is not supported if the video format is
changed after recording a clip.
Recording review method
Assign Rec Review to one of the assignable
buttons beforehand.
When recording is stopped, press the
assignable button (page 100) with Rec
Review assigned. Playback of the last recorded
clip begins.
The clip is played to the end, Rec Review ends,
and the unit returns to STBY (standby) mode.
To stop Rec Review
Press the assignable button assigned with Rec
Review or press the BACK button.
Recording review settings
You can set the playback start position to one
of the following using the Rec Review setting
(page 58) in the Technical menu.
• Last 3 seconds of the clip
• Last 10 seconds of the clip
• Start of the clip
[Tip]
If you want to review a specific clip after recording
multiple clips, press the CLIPS button to display clips
screen, and select the clip to start playback.