Table of Contents
Advertisement
100
5. Shooting
Useful Functions
Direct Menu Operation
When the shooting screen is displayed on the
LCD monitor, you can check the status of the
unit and directly select and change settings
displayed on the screen.
The following items can be configured.
• Auto Focus Mode
• Steady Shot
• Auto Exposure Mode
• Auto Exposure Level
• ND Filter Position
• Auto ND Filter
• ND Filter Value
• Auto Iris
• Iris Value
• AGC
• Gain Value
• ISO Value
• EI Gain
• Base ISO/Sensitivity
• ECS
• Auto Shutter
• Shutter Speed Value
• Shutter Angle Value
• ATW
• Auto White Balance
• Color Temp.
• Tint
• Preset White Select
• Scene File
• S&Q Motion Frame Rate
1
Press the multi-function dial, or an
assignable button assigned with the
Direct Menu function.
Only the items on the screen that can be
configured using the direct menu are
selectable using the orange cursor.
2
Turn the multi-function dial to move the
cursor to the menu item to operate, then
press the multi-function dial.
A menu is displayed or the item is
displayed on a white background.
3
Turn the multi-function dial to select a
setting, then press the multi-function dial.
The menu or white background
disappears and the new setting is
displayed with an orange cursor.
Press the assignable button assigned with
Direct Menu again or wait 3 seconds
without performing any action to exit the
direct menu.
[Tips]
• Direct settings can also be configured by
pressing and holding each of the function
buttons.
• When items are displayed on a white
background, the multi-function dial can be used
like an assignable dial.
• The multi selector (page 4) can also be used
for selection operations.
Assignable Buttons/Dials
The unit features ASSIGN 1 to 3 and ASSIGN
7 to 11 assignable buttons (page 4, 5,
6, 8) to which you can assign functions.
You can also assign functions to the multi-
function dial (page 4) on the unit and the
assignable dial on the grip remote control
(option). The ASSIGN 4 to 6 buttons are
located on the grip remote control (option) or
RM-30BP (option).
Changing the button function
Use Assignable Button (page 45) in the
Project menu of the full menu.
You can view the assigned functions on the
Assignable Button status screen (page 29).
Functions assigned to each assignable button
by factory default
Button 1
Off
Button 2
Off
Button 3
Off
Button 4
LCD Focus Magnifier
Button 5
Direct Menu
Button 6
Off
Button 7
Off
Button 8
Off
Button 9
Off
Button 10
Off
Button 11
Off
Focus Hold button Focus Hold
Functions assignable to buttons
• Off
• Base ISO/Sensitivity
• AGC
• Push AGC
• ND Filter Position
• Auto ND Filter
• Push Auto ND
• Iris (function button)
• Auto Iris
• Push Auto Iris
• Bokeh Control
• Auto Shutter
• Auto Exposure Level
• Backlight
• Spotlight
• Auto White Balance
• ATW
• ATW Hold
• AF Speed/Sens.
• Focus Setting
• Subject Recognition AF
• Push AF/Push MF
• Focus Hold
• LCD Focus Magnifier
• Output Focus Magnifier
• S&Q Motion
• LUT On/Off
• LUT On/Off
• Image Stabilization
• Crop Select
• Rec
• Picture Cache Rec
• Rec Review
• Clip Flag OK
• Clip Flag NG
• Clip Flag Keep
• Color Bars
• DURATION/TC/U-BIT
• Display
• Lens Info
• Video Signal Monitor
• Marker
• LCD Monitor Adjust
• LCD Monitor Mode
• Gamma Display Assist
• Peaking
• Zebra
• Volume
• Clips
• Touch Operation
• Handle Zoom
• Auto Upload (Proxy)
• Direct Menu
• User Menu
• Menu
Changing the dial function
You can change the function of the multi-
function dial on the unit and the assignable
dial on the grip remote control (option).
For the multi-function dial, set using Multi
Function Dial (page 47) >Default Function in
the Project menu.
Iris is assigned by factory default.
Functions assignable to the multi-function
dial
• Off
• ISO/Gain/EI
• IRIS
Advertisement
Table of Contents
