Camera Operations; Lcd Monitor Screen Structure - Sony BURANO MPC-2610 Operating Instructions Manual

Digital motion picture camera

Table of Contents

3. Camera Operations

LCD Monitor Screen Structure

The LCD monitor screen operates in two modes centered around the Home screen: video monitoring mode where you can check settings while monitoring the video, and information display mode

where you can check and change information and settings. You can switch between modes using the HOME button. The status screen, full menu screen, playback screen, and clips screen can be

displayed in each mode.

You can switch between the screens to display on the LCD monitor using the HOME button, MENU button, and CLIPS button.

Status screen

MENU button

button

Playback screen

[Tips]

• In video monitoring mode, you can output the same display screen as the LCD monitor to an external monitor.

• Information display mode is designed for LCD monitor use in combination with a connected external monitor for HDMI output. The external monitor should be placed on the operator switch side of the unit for monitoring the video, and

the LCD monitor can be placed on either the operator switch side or connector side for configuring settings, depending on the composition of the shooting team. The screen display cannot be superimposed on the SDI output except when

the codec is set to X-OCN.

– The functions displayed on the LCD monitor are operated using the multi selector of the LCD monitor or the multi-function dial on the operator switch side.

– The functions displayed on the external monitor are operated using the multi selector on the operator switch side. You can select a subject recognition frame, move the focus area, and move the focus magnifier position.

• For X-OCN, the index image is not displayed on the clips screen.

Video monitoring mode

Full menu screen

Shooting screen

CLIPS button

Clips screen

Select clip

(playback)

CLIPS

button

Status screen

HOME button