Table of Contents
Advertisement
77
4. Network
Uploading Files
You can upload a proxy clip or original clip
that is recorded on the unit to a server on the
Internet or a server on a local network via a
smartphone or access point.
Preparations
Connecting to a network
Connect the unit to the Internet or local
network as described in "Connecting to the
Internet" (page 75) or "Connecting to Other
Devices via LAN" (page 72).
Registering a file transfer destination
Register the server for uploading in advance.
1
Select File Transfer >Server Settings1 (or
Server Settings2, Server Settings3) in the
Network menu of the full menu.
The transfer destination setup screen
appears.
2
Set each item on the transfer destination
setup screen.
Display Name
Enter the name of the server to display in
the transfer destination list.
Service
Displays the server type.
"FTP": FTP server
Host Name
Enter the address of the server.
Port
Enter the port number of the server to
connect.
User Name
Enter the user name.
Password
Enter the password.
Passive Mode
Turn passive mode on/off.
Destination Directory
Enter the name of the directory on the
destination server.
[Notes]
• Original clips are uploaded to the "Main" folder
within the directory specified as the transfer
destination.
• When editing, "" indicates characters that
cannot be changed. Correct operation is not
guaranteed when editing a directory name that
contains these characters.
If you need to edit, delete all the characters and
re-enter a value.
• If characters that are invalid on the destination
server are entered in Destination Directory, files
will be transferred to the user's home directory.
Invalid characters will vary depending on the
server.
Using Secure Protocol
Set whether to perform secure FTP
uploading.
Root Certificate
Load/clear a certificate.
• Load
Select Set in step 3 to import a CA
certificate.
* The certificate to be loaded must be in PEM
format, and should be written to the root
directory of the SD card inserted in the Utility
SD card slot with "certification.pem" file name.
[Tip]
The certificate validation verification method is
OCSP. The certificate structure is given below.
-----BEGIN CERTIFICATE-----
(Your Root certificate)
-----END CERTIFICATE-----
• Clear
Select Set in step 3 to clear a CA
certificate.
• None
Do not load or clear a certificate.
[Notes]
• Set the clock of the unit to the correct time
before importing a CA certificate.
• When recording in XAVC-I
4096×2160P/3840×2160P, XAVC H-I HQ/SQ, or
X-OCN, Load cannot be selected.
• In low voltage state, Load/Clear cannot be
selected for a CA certificate.
Root Certificate Status
Displays the load status of the certificate.
Reset
Reset the settings of Server Settings to
the defaults.
3
When finished, select Set to apply the
settings.
Always select Set after changing the
settings. The settings are not applied if
Set is not selected.
Selecting and Uploading Clips
You can upload proxy clips and original clips
on memory cards to a server.
Uploading a proxy clip on a memory
card from the clips screen
1
Connect the unit and device using a LAN
connection (page 72).
2
Select Transfer Clip (Proxy) >Select Clip in
the Clip Operations menu of the full
menu.
The display changes from the full menu to
the clips screen.
Clips can be transferred from the clips
screen or the filtered clips screen.
3
Select the clip you want to transfer, then
press the MENU button.
A transfer confirmation screen appears.
4
Select Execute.
The group of files corresponding to the
selected proxy clips is registered as a
transfer job, and uploading begins.
When the transfer job is successfully
registered, the transfer result screen
appears.
5
Select OK.
Advertisement
Table of Contents
