Installing The Rails; Identifying The Sections Of The Rack Rails; Locking Tabs - Supermicro SuperServer 1019D-FRN5TP User Manual

2.3 Installing the Rails

There are a variety of rack units on the market, which may require a slightly different assembly
procedure. Also refer to the installation instructions that came with the rack.
This rail set fits a rack between 26" and 33.5" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rack rail assemblies in the rack mounting kit. Each as-
sembly consists of two sections: an inner fixed chassis rail that secures directly to the server
chassis and an outer fixed rack rail that secures directly to the rack itself.
Figure 2-1. Identifying the Sections of the Inner Rails

Locking Tabs

Both chassis rails have a locking tab. The tabs lock the server into place when installed and
pushed fully into the rack. These tabs also lock the server in place when fully extended from
the rack. This prevents the server from coming completely out of the rack when you pull it
out for servicing.
Inner Rails
(Inner rail is preinstalled
on the chassis)
23
Chapter 2 Installation in a Rack
Inner Rail Locking Tabs