Endless Pools FASTLANE PRO Owner's Manual page 35

9.5 Attach a length of #8 solid copper wire (provided locally) to the bonding lug. This wire MUST be
incorporated into the pool's bonding grid. Route the hydraulic hoses into the deck plate bottom and out
the rear. Pull any excess hose out of the pool and plate. A hose clip is provided to secure the hoses. Feed
each hose into the clip and then secure the clip to the plate (Fig. 9.5).
Ehf- 8-4
9.6 Attach the deck plate cover to the deck plate bottom using the provided 1/2" (13mm) screws.
Adjustments may need to be made to the bonding wires in order to seat the cover (Fig. 9.6).
Once the unit is fully mounted, the top lid can be attached to the housing (see Fig. 6.4).
/.1 #/2ll( Oghkkhor
Sqtrr GdZc Rbqdvr w5
Cdbi OkZsd
Bnudq
Ehf- 8-5
"6 Rnkhc Bnoodq Vhqd
sn onnk anmchmf fqhc
GxcqZtkhb
Gnrd w1
EYrskYmd Oqn Rvhl Tmhs HmrsYkkYshnm
°
Gnrd Bkho
23