Endless Pools FASTLANE PRO Owner's Manual page 10

EYrskYmd Oqn Rvhl Tmhs HmrsYkkYshnm
°
Rdbshnm 3 V:KK LNTMS AQ:BJDS HMRS:KK:SHNM
The following sections provide detailed instructions for installing the Wall Mount Fastlane Pro
V
Mounting bracket. The instructions vary depending on the type of pool (gunite, steel panel/vinyl
liner, gunite/vinyl liner, -berglass) the unit is being installed in. Re6er to the appropriate section.
3-: FTMHSD ONNK
If the pool being constructed is gunite, please follow the instructions below.
The Mounting Kit for Gunite pools includes:
(1) PVC Wall Bracket
(2) Bonding Clamp
(2) 3/8" (9,5mm) Stainless Steel Threaded Mounting Rod
(6) 3/8" (9,5mm) Stainless Steel Jam Nut
(6) 3/8" (9,5mm) Stainless Steel Flat Washer
(2) 3/8" (9,5mm) Stainless Steel Lock Washer
(2) 1-1/2" (38mm) Thru-Wall Fitting
(2) 1-1/2" (38mm) MPT x 1" (25mm) FPT Bushing Reducer
(2) 1" (25mm) Liquid Tight Fitting
Secure the thru-wall $ttings to the wall bracket as shown in Figure 4.1. The rubber gasket should be
between the thru-wall and the bracket on the poolside of the bracket and the cork gasket between the
bracket and the lock nut on the outside. Tighten the lock nut with a pair of channel locks or strap wrench.
Ehf- 3-0
8
IWl Mts
Jnbi VWrgdq
EkWs VWrgdq
/)/-1 &25ll( OUB Ekdw
&Rtookhdc Ax Nsgdqr(
EkWs VWrgdq-IWl Mts
&AWbi Ne AqWbids(
EkWs VWrgdq-IWl Mts
&Eqnms Ne AqWbids(
Sgqt)VWkk Ehsshmf
/)/-1 &25ll( w / &13ll(
Atrghmf Pdctbdq
/ &13ll(
Jhpthc Shfgs Ehsshmf
Sgqt)VWkk Ehsshmf
Jnbi Mts
Bnqi FWrids
Anmchmf BkWlo
SgqdWcdc Pnc
VWkk AqWbids
Ptaadq FWrids