Figure 5-3: Processing Path - evertz 7800 Manual

Genlock Control Tab
MISC Faults Control
Tab
To access the processing controls for Path 1 or Path 2, right click on the Path 1 or Path 2 icon in the
navigation tree. Each processing path has the following control tabs shown in Figure 5-3.
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter
Selects the source of card genlock. Selects whether DA4A/GEN operates as
an input for genlock or operates as a DA output. A more detailed description
can be found in later sections of this manual.
Controls for enabling and disabling misc card faults including genlock status
and board temperature status. More detailed descriptions can be found in
later sections of this manual.

Figure 5-3: Processing Path

Revision 1.0
7800 MultiFrame Manual
Page 15